reciever just blinking HELP PLEASE
Okay I turn on my transmitter made sure the trim and the throttle were all the way down. When I connected the battery to the reciever the led just flashed slowly. No funtion. Now if i connect and disconnect it a couple times it will register the rotor will spin wide open. Then only for about a minute I have control then the led goes back to flashing and nothing. I never got a chance to fly it because when it first went wide open it broke the tail blade and bent the flybar . So now I'm just waiting for parts. I already ordered a new receiver and a metal head upgrade. I'm hoping the receiver was the problem. No I didn't touch any of the switches on the front or the back of the transmitter and all my batteries were new and the antenna was attached and extended.[:@]