was able to get it finally what happened was the guide tube broke free from the former closest to the tail and somehow faced down into the bottom of the fuse with a edge of the former kinda of twisted and putting some force on it. So accesing the tube from the rear was nearly impossible i tried all sorts methods of snagging the tube. Going through the front back ended up working. Used a smaller guide tube with the pushrod glued about 2 inches in, i did try this somewhere around 100 times but with no luck, kept breaking away as it entered the tube guess sometimes just need to take a breather still was alot of messing around but its in. Thanx for the replies. Need to get some patience now, anyone know where to buy that lol.