Mike, I have a weird problem with my Eclipse radio. I was trying to program in Flapperons. I followed the instructions in the manual, but when I flew my plane, the wing would do a severe dip to the left with no input from me. I couldn't tell if the left wing servo was moving the aileron up or if the right wing servo was pulling it's aileron down. Maybe both ailerons were moving. I managed to land the plane safely, but couldn't seem to get rid of the glitch. I installed a Y connector and hooked it to the aileron port in the receiver. I now have no Flapperons, but haven't had further problems. Could I have done the programming incorrectly, or could I have a software glitch in Flapperon mode?