got them out with an allen wrench. i got it all put back together took me 5 hours LOL and got a little test spool up to make sure she halfway flies. not perfect, i gotta track the blades their kinda off, and get the swash plate a little more level. and also i got a pitch gauge finally, i've been flying mainly in reg mode not idle up, so i want to have a little more neg pitch than normal to battle any winds since its spring and so windy. i had no probs with how it came set out of the box, but i didn't have a pitch gauge till after the crash so i don't know what settings it was on. what kinda pitch do i need at no throttle, mid, and high? also the flybar on blade400 is below the mainrotor and it seems harder to line it up with the pitch gauge than my beltcp with flybar is on top of main roto? any tips on getting the best reading for the blade400. thanks