I have a problem, or so I think I do. Relatively new to the hobby have been flying for about two or so months so any help would be great. I have a Mini Titan with a GY401 and a futaba 9650 on the tail. My question is my tail holds fine if I am just hovering haven't really been able to check in FFF but when I increase collective to do a fast climb out my tail blows out and begins to spin counter clock wise I am guessing soem adjustment should solve this problem just not sure what adjustment to make. By the way travel on the servo is good no binding anywhere on the tail and my gain is about 75% any help would be great thanks....