RCU Forums - View Single Post - ESKY LAMA 4 THREAD
View Single Post
Old 05-04-2008 | 10:00 AM
  #70  
superstocktx
Member
 
Joined: Dec 2007
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
From: Rolla, MO
Default RE: ESKY LAMA 4 THREAD


ORIGINAL: flying-shark

Hi Guys,

I am looking for step-by-step assembly instructions for the Esky Lama V4 (inc balancing the blades). The manual is not too helpful really... Appreciate any help or links you guys are aware of. I cant find anything that good.. My swashplate seems like it is not right, this is what I want to correct 1st if I can. Seems like a really sweet chopper so far though!

Thanks all!

Go to www.lamav4.com. There you'll find some upgrades for the v4, also I would get the aluminum swash plate and alum. inner shaft. Dont waste your money on the alum. blade grips(they cause problems), but if you do want them, I'll Give you mine(for free), but you pay for shipping. With some fine tuning your v4 will be a very nice heli to fly, but some of them out of the box are not set up right and require tuning. Feel free to ask me any questions about the V4, I have one and have experimented with it alot.

Have a great day,
Dennis