Welcome back, Chad. Let me know if you have any questions on the tailwheel parts and notes. Nothing significant there, just a couple of very minor details.

Scott, I'm intrigued by your thoughts on the cockpit. I'll probably end up making a full size prototype of that area to work on the sliding canopy that we can certainly pass around. I haven't worked with carbon fiber at all. Would it be easier to make a female mold from the prototype and lay up the CF inside that?

Chris and I spent about 4 hours this weekend getting most of the glass cloth laid down on our 1/8. We'll probably add the flow coat of Polyester resin this week. One of the flaps is sagging a little bit, so we want to fine tune that before we button down the glass and prime. I didn't post any pictures on the 1/8 Mods thread mostly because I don't think glassing is all that interesting.

Tom