I have a Firebird XL which is my first plane and i am just learning the ropes, i hope to get a .40 sized trainier sooner or later but that is besides the point, so what i wanted to know is, on my Firebird XL when i attach the wing and have a slightly iffy landin the wing gets pushed back into the prop and takes a large chunk. i was wondering if i used Epoxy on the immediate area around the impact zone would that stop the prop ripping it up? if so would 5 min Epoxy do it or would i need 30min or so? Or you probably have a much better idea than me to stop it so lemme hear it! (p.s. dont talk to techincle to me coz i wont understand it :P) thanks