RE: *Official Sportwerks Turmoil Thread*
Has anyone had a problem with the turmoil pro cooling head? I went to run my car and noticed that last time I put after run oil in I didnt tighten the plug down all the way. So I tightened it up and after a few runs I saw a couple of drops of liquid around the plug. I thought it was nothing to worry about until I went to check the temp again and I saw bubbling at the base of the plug. I turned it off backed out the plug and tried to put it back in but it seems like its going in on an angle. I changed the plug but might glow igniter died so I have to wait to see if just the plug may be bent. Anyway anyone heard of anything like this before.