I must admit, this kit is quite intimidating. So much so i want to get it done, which means im rushing. I dont think Ive messed anything up, but i think I'm further than I should be. In two day, Ive finished the Horizontal and vertical stabs with related control surface. Hinges cut and tested. And im almost done the left side of my wing. Im doing the sheeting on the top and the only thing stopping me is the lack of clamps, so i want to wait until all glue is dry, because im afraid me sticking pins in will shack it enough for other glue joints to break. Should I be this far? Im using wood glue too, so i have to wait for it to dry. Im afraid im going to fast and Im bound to screw up. I dont want to though.