RCU Forums - View Single Post - 50cc Sukhette Build Thread, now in progress!!
Old 06-07-2008 | 08:43 AM
  #1121  
R Plante
Member
 
Joined: Mar 2002
Posts: 93
Likes: 0
Received 0 Likes on 0 Posts
From: Stettler, AB, CANADA
Default RE: 50cc Sukhette Build Thread, now in progress!!


Mine will be in the air tomorrow weather permitting but I was wondering what weights others have came in at . Mine is 17lbs 6oz with the carbon tube . could take the pants off and save 4 oz . Set up with 5955 all round with 5475? on throttle and choke. Mvvs 58 on a three pipe bisson muffler which was 10 oz lighter than the cannister set up plus My header wouldnt work with this plane . engine is turning a 24x10 mejlik at 6350 or a 24 x 10 bunny at 6600. less than the 7200 on the mejlik on the can but should still be lots of power .I am running lipos and regs now but the A123 are on the way and I have to upgrade my thunder power 1010c charger to charge them also going to the new Fromeco Kodiak switches with the mah indicator on them.

Any issues any one can spot?


Randy