RCU Forums - View Single Post - NEMESIS CENTER DIFF OUTPUT CUPS
View Single Post
Old 06-23-2008 | 07:54 AM
  #1  
derrick05
Senior Member
 
Joined: Apr 2007
Posts: 473
Likes: 0
Received 0 Likes on 0 Posts
From: Brevard, NC
Default NEMESIS CENTER DIFF OUTPUT CUPS

Okay,Ive had my NEMESIS for a year now and still havent had any breakage and still havent rebuilt my motor yet and lost count after 11 gallons.No heat issues,so shifting issues,a great truck.My truck is stock other than the added fuel filter,removed the muffler baffel and added a battery pack.The only parts I have changed are the clutch springs and both servosEXCELLENT!Its due to a great product and the great care I take.Things like not running on pavement is why my parts last.During regular inspection,I noticed that the drive cups coming from my center diff are worn[:@](my first worn part)the axle stubs are still good.So I figure,no big deal,normal wear and tear.As I looked over my paperwork to see what its gonna take,I got a bad feeling.Its gonna take more than removing a set screw to change these cups.From what I see,Im gonna nearly have to replace the entire diff[:@]at least the big gear.From what I can tell,I may be able to replace one cup IF I can get the stupid screws out of the diff,and the other cup looks impossible to change.Any advice or tips from anybody on this.Sure would like to hear from cenracing on this,TRD,NOMOBUX,MR.TERMINATOR.A little how to and some part #would help.Im not feeling good about this right now because I think Im gonna have to change the whole center diff just for the cups[:@]THE NATURE OF THE BEAST![sm=48_48.gif]