She is done except for the decals. I have included a couple of photos of the fuel tank installed and of the nose wheel block. I drilled through and used blind nuts to hold the block as I felt the firewall was a bit soft and the wood screws would pull out.

I also installed a ElevtroDynamics Servo Slo for flap control. The Airtronics RD8000 has a three position setting for the flaps and using the control allows me to bring the flaps down slowly and maintain level flight with the elevator. I will eventually mix in some down elevator via the radio once I have her all trimmed. Now for a nice afternoon with gentle winds.

Changed main landing gear to 3 inch wheels. Supplied wheels makes the nose sit high,

Jim