Jay,
I KNEW you'd love it, I'm not rubbing this in either (Oh, yes I am
) Couple things I noticed in the pictures, picture 1, looks like two of the three connectors for the motor to ESC are not plugged in all the way. Picture 2, check your main gear for worn teeth, hard to tell in a picture. Oh, speaking of main gear, I've got a Micro-Heli main gear. Perfectly round, made of harder stuff, much smoother than the stock main gear. Oh, forgot, it's pricey too, 39 bucks. However, it's lasted me much longer than 4 or 5 of the stock main gears, so it's kinda like an "Even-Steven" proposition. And it still looks like new. The stock main, will wear over time, and in a bad crash, usually will strip some teeth.
Pictures are great and I can tell you are having a good time with it. (Rub-Rub
)
HEY, I found a couple old pictures of me, flying the Blade CP in the back yard. About 18 months ago. They are a little dark, but, (shhh), my wife took them, don't tell her.[sm=spinnyeyes.gif]
Keep having fun, that's what it's all about,
God Bless,
Dave / Choppersrule
-
ORIGINAL: theradioflyer
Hey All,
I put the Futaba 7CHP to the HBKII tonight so I can design my own pitch curves through the computer. Everything went quite well considering I barely understand what I'm doing. So far I'm very close on the normal mode throttle and pitch curves. I did this at my house so I didn't try to hit Idle Up. I like to have room to catch it if it does something bad. The wind picked up before I was done so I did a short hop in the basement in a 5 foot by 4 foot area. I think I'm getting comfortable with it[8D]
I hope all is well!
God Bless,
Jay