Yeah.... On a Belgian waffle with a side of bacon[8D]

Dave, great eye on the pics. The connectors I'm using match up but don't push all the way in. I secure them with a tight wrap of 3m electrical tape when it's ready to fly. I've been working on the programing so I unplug 2 of the wires to make sure I don't have a sudden OOPS and it spools up. I have the MicroHeli w/ oneway bearing gear sitting on the bench but until I completely destroy the stock one it will wait. It has just minor damage from the first incident but still very flyable. I'm waiting on switching to the Telebee gyro just to work with the stock one and test it's limitations. I turned up the gain today and it seemed to be better than before, although just hovering and no FF. I'm also waiting to put the Carbons on. I'm finding that the stock woodies are very hard to tune. Low speeds tracking is off, midspeed/hovering they are right on, highpeed punchout they track off again. They are probably warped.

God Bless!

Jay