Hi Bob,

Please forgive me for not answering you, other portions of my job will keep me quite busy.

While you can do two separate mixes you must just remember that when you flip the switch it will make both of them active.

You can mix any two channels you wish with one Pmix, then mix a comination of either of these to the second Pmix or mix two more entirely different mixes, BUT again, once you hit the switch, they will both become active.

There is no way to "toggle" between these mixes, you must go into one or the other and Inhibit one of them in the programming to make it not activated by the switch.

I hope you find this information helpful. Should you have any further questions or concerns, please do not hesitate to contact us at 217-398-8970 for Support, 217-398-0007 for Service or via fax at 217-398-7721 or by email at [email protected].

Sincerely,
Krysta
Lead Futaba Customer Service and Programming Technician
Also you may want to check our Website at (http://www.futaba-rc.com)