Bob & Chad and anyone else who might know.

The main gear on the 51 is canted forward, somewhere I thought I read that it was 5 degrees but I'm not sure. In fact here are some questions that might be worth knowing for anyone interested in full scale Mustangs.

1. Down thrust on engine 1 degree 30 minutes
2. Wing dihedral 5 degree
3. Washout ?
4. Horizontal stab incidence 1 degree
5. Vertical 1 degree offset to left

Are these numbers right?

The Revolution 52 looks perfect for this project. The carb is in the rear. from the backing plate to the mount is 8.4" and the height is 6.1.

Whats the web address for Siera Precision I can't find it?

Thanks

John