[X(]Ohh god iv jsut had a brain wave i know the low slung look is just too good and its hard to achiev it on rc modles because there isnt enough room to install air bags to the wishbones(i know iv tryed[8D]) so what not make the shell raise up and down so what it stops the shell hits the deck and when it pulls off it raises about 5 mill that way its practical for driving??what you think lads any ideas on how i will do it i was thinging of a long post smoothed out and iletso n the shell so it runns smooth with a r clip at the top where it would ride the highest and a extra sevro that hits the top of the shell when the accelerator is preser (make a Y harness from the reciever to the ESC and the other strand to the extra servo because that way when i accelerate it will acutivate the servo [8D] bloody hell iv only just thought about drifitin and im getting crazy thoughts like a working water cooling system with a working intercoller and fans )
thanks tom