RCU Forums - View Single Post - Finishing a Cajun R/C Tiger Tail IV

10-03-2008 | 03:49 PM

#16

ramcfarland

My Feedback: (44)

Joined: Nov 2002

Posts: 3,791

Likes: 0

Received 1 Like on 1 Post

From: Waldorf , MD

RE: Finishing a Cajun R/C Tiger Tail IV

Replying to me self again not good......

Finish primed and lightly wet sanded with #400 then 800 cleaned the surfaces with Klass Kote solvent ,then mixed Klass Kote White with gloss catalyst ,let set about 20 minutes per instructions and then gently went over the airframe with a tack cloth,loaded my new DeVilbiss STARTING LINE HLVP touch up gun with 1.0 tip and shot the thing ... Now for the trim scheme.

Attached Thumbnails

Click image for larger version

Name: Db84631.jpg
Views: 34
Size: 61.9 KB
ID: 1045422

Click image for larger version

Name: Wr54654.jpg
Views: 36
Size: 52.8 KB
ID: 1045423

Click image for larger version

Name: Qv55043.jpg
Views: 42
Size: 84.3 KB
ID: 1045424

Click image for larger version

Name: Ct17236.jpg
Views: 41
Size: 52.9 KB
ID: 1045425

Click image for larger version

Name: Qs28452.jpg
Views: 42
Size: 84.6 KB
ID: 1045426

Click image for larger version

Name: Hn61352.jpg
Views: 46
Size: 51.3 KB
ID: 1045427

Click image for larger version

Name: Is77696.jpg
Views: 40
Size: 59.9 KB
ID: 1045428

Reply Like