Hello guys,

What should be the minimal force of the sevo's. It is not in my manual.
I noticed that the control surfaces are not very large. I want to use Futaba S3152 digital on the ailerons. They have 69 -4.8 v and 87 - 6V. For the other surfaces Futaba S 3010. They have 72 -4.8 v and 90 - 6V. For the throttle and the gear switch, I'll use the S3004.
Since there will be 10 servo's, how big a battery will I need?

Regards,

Eric Schumacher, Netherlands.