RCU Forums - View Single Post - tiger 60 with a 26cc engine?
View Single Post
Old 10-30-2008 | 05:26 AM
  #17  
Missileman's Avatar
Missileman
Senior Member
 
Joined: Feb 2006
Posts: 3,204
Likes: 0
Received 0 Likes on 0 Posts
From: Poland, OH
Default RE: tiger 60 with a 26cc engine?


ORIGINAL: gaRCfield

All I know is I tried very hard and talked to a lot of respectable pilots in different flying categories (pattern, IMAC, and 3D) and found that it is very difficult to find a happy combination of 25% plane and gas engine. 26cc is not enough power (for aerobatics) and 40 cc is too much weight. What is the wing loading on the Yak with the 40cc? What happens when it dead sticks? I thought about getting something very similar, and these were the questions I was asked. And of course there are always exceptions, and you can get things to work that are not optimum.
I guess the point is you are lumping all airplanes into this. Not everyone is interested in flying a lot of aerobatics.
My GP Super Stearman has a G26 in it and is a perfect match. And even then it will do aerobatics just fine.
No it will not hover but it is not suppose to, it is not that kind of plane.