Trax: They aren't going out of buisiness. I emailed them mid October and inquired on having two 1/6 scale kits cut, a DH-2 and E. III Eindecker, here is the correspondence:

Me
Hello,

I would like to have 2 kits cut from Cleveland Model and Supply plans, both are 1/6 scale plans. The plans are for a DeHavilland DH-2 (56" wingspan) and a Fokker E. III (61.4" wingspan). From your website I understand that you are not taking anymore orders for kits to be cut and I was wondering when this will be lifted as I would like to have your company cut the kits for me. Also I wanted to know how much the full kits would cost. Thank you for your prompt response.

Charles Reaves

Kit Cutters
From: [email protected]
To: [email protected]
Subject: Re: 2 kit plans to be cut
Date: Mon, 20 Oct 2008 06:42:03 -0700


Its going to be Spring of 2009 at the earliest. This is only an estimate at this time.
The cost is what is shown on our website.
Shipping cost for each kit would be about $20.00 USD in the USA. About $10.00 USD additional for overseas.

When we resume taking orders, we will contact you by email to see if you are still interested.

Joe Hrkel

Kit Cutters Inc.
8771 Seaspray Drive
Huntington Beach CA 92646-2649


YOU MUST BE 18 YEARS OF AGE TO PURCHASE FROM KIT CUTTERS INC.
Kit Cutters Inc. assumes no liability or responsibility for the use of, or flying of, or building of the model associated with this transaction and the user of these plans or model kits, through building and/or flying assumes all responsibilities for the model and any damage or harm incurred through its use or non-use.


If you want to use them I'd suggest emailing them so they can contact you when they are caught up on thier current workload.