Gents,

Preparing the color scheme of the Taurus, again using the picture from Nobelchuck as the example.

I did make tape on the fuselage on 4 positions with dashes on them, bar lines.
After that I did make a picture from (nearly) the same position as the example.

After scaling the two fuses in 1 picture, I can copy blocks from the example on my white fuse and calculate the exact positions of the color scheme on the bar lines.

I can do the same with the back side by making a mirror image.

I know, the black dash does have another proportion on the back side, so have attention for that.

The canopy is still a little too high, this is completed when mounting on the fuse in the future.
Cees