RCU Forums - View Single Post - IMAC vs Pattern
View Single Post
Old 11-16-2008, 11:43 PM
  #20  
MTK
Senior Member
 
Join Date: May 2004
Location: Whippany, NJ
Posts: 5,386
Likes: 0
Received 1 Like on 1 Post
Default RE: IMAC vs Pattern


ORIGINAL: bobflies

All of our models??, Sorry my name is Robert Godfrey, Son of the late Bob Godfrey and President of Precision Aviation Design. I had worked with my father from the early 80's untill he passed a couple of years ago. I have been designing models from about '95. I did the 10% verification from the late 80's on for all of our models including the present designs. Also I see that I mispelled our websites address its, www.bobflies.com there is a write up on dad on the main page that has some of the history you are talking about. We still produce models here in Florida and I take care or my Mother here also. All of the present production models will fly Pattern or 3D without any C.G. change by design.
Thanks,
Robert
Interesting...So Bob Goddfrey Models became Precision Aviation Design.

Do you guys make a real pattern capable airframe? If you do, you should advertise in the KFactor. If it's a good flier, many guys will buy it if reasonably priced either as kit or ARFie

MattK