RCU Forums - View Single Post - where full scale and giant models overlap
Old 11-23-2008 | 08:43 PM
  #5  
cyclops2's Avatar
cyclops2
 
Joined: Dec 2005
Posts: 3,057
Received 7 Likes on 6 Posts
From: Frenchtown, NJ
Default RE: where full scale and giant models overlap

The boat is a double bottom construction. All wood is 1/8" Birch. Inside flor & deck stiffeners are cut from light & cheap 2 x 4 scrap. Seats & steering is from a old lawn mower. Trolling motor is mounted in a rear well box. Cut hand control & cables of motor off & mounted it next to the steering wheel of driver. Battery & the RC remote controlling of the power in the boat is under the front deck. Adult on the beach can shut off all power if things go bad with the hand held RC transmitter.

Lost the pictures of the kids motoring around in it with their mom swimming along side.

Rich