Few questions.
1) Can this setup be used as a beginner's plane? I need a small plane as all I am going to have available is a tiny field much smaller than a football field.
2) Would these components go together satisfactorily or should something be changed?
3) What TX system would I need?

[link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001058804&I=LXK595&P=K]Guillows Cessna Skyhawk 172 [/link]
[link=http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=5358]18-11 2000kv Micro Brushless Outrunner (10g) [/link]
[link=http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=4204]TURNIGY Plush 10amp 9gram Speed Controller[/link]
[link=http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=663]HXT500 5g / .8kg / 10sec Micro Servo (qty 2)[/link]
[link=http://www.allerc.com/product_info.php?cPath=3_4_69&products_id=1245]7.4 VOLT ETEC 450 MAH HIGH PERFORMANCE LIPOLY PACK[/link]
[link=http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=7510&Product_Name=Corona _4Ch_Single_Conv._Rx_72MHz_(Incl._10_Rx_Crystal)]Corona 4Ch Single Conv. Rx 72MHz (Incl. 10 Rx Crystal)[/link]