RC Snowmobile Polaris Fusion 900 Build Thread
I am going to be building up my Polaris Fusion snowmobile and i will be posting up pic's as i go.I hope others who have a Polaris Fusion snowmobile can look here to help there own build along.I will be useing a brushed motor something between a 15t and a 27t.I'll probably use a novak rooster esc and run it on 7 cell's(ib4200).For a servo i'll use the one from my rock crawler.
The main issue i am having is how to fabricate a driveshaft for the track-pulley that can ride in some bearings.The track-pulley has a square hole for the stock square driveshaft.So it is posing a problem.Once i figure out how to build a drive shaft that can ride on bearings and have the track pulley locked on i will move forward with the build.
All ideas and sugestions welcomed
So- Please Post up your Polaris Fusion build's, tip's and idea's