So,

How about if we get the thread back on topic? the original question was if anyone had experience with the motor. Joenella was kind enough to post some pictures of it. Do we have any more information on this? I went to the website and there's a good pic of it. I like the prop shaft arrangement. They state 850 RPM/min/1V 170 RPM/min/1V behind gearbox. I am not sure how that compares with the stated 1300 RPM/V listed for the Neu F3A-1 and 1249 RPM/V listed for the hacker c50-13xl. It seems low if it is 850 vs 1300 or 1249, so the 5:1 gearbox ratio is probably about right for this motor. Using these posted figures, the numbers behind the gearbox would be 170 rpm/v for this, 194 rpm/v for Neu and 186 for Hacker. The 60A max current rating seems light however.