Hi guys; Thought I would get in on this discussion on the Top Flite Cessna 182 as I have built one 2 yrs. ago. I installed my servoes in the stock location and wish I hadn't. The next time I'll install them under the interier. Sorry about not having any pictures to post but if you look in the Sept. 2007 of Model Aviation there is a picture of mine, if not Sept. it could have been Aug. but any way it's yellow, black and white and the vert. stab is checker board. I finished mine with .02 carbon tissue and dope. This saves alot of time because of the amount of sanding you don't have to do. As for the interier I painted mine with 2 differant shades of gray primer and for the the floor I used gray felt. Also on the back of the front seats I made a magazine pouch and used cut outs of magazine pitchures and placed them in the pouch. If you have any ? about my build and would like to know more you can reach me through my e-mail. capncookiecutter@hot mail.com. jc16057