I am building a Morris the knife kit. I have the fuselage ready to positon the pull pull yellow nylon sheath and cant for the life of me figure out where these go and how the servos are to be mounted in the wing. The plan doesnt even show the throttle servo or how the pull system is connected or how many servos. The plan is very vague and I have built a few kits but not fun flys. Surelly they could have included a suggested method. The insert that was provided is vague and not of the Knife airplane. Is there anyone out there who has pictures of how you made your control setup? I need some detail pics. Have broadband so can take large files. I just cant seem to figure this one out yet without help!