I had to read his post three times before it sunk in what he was preposing. In theory, it will work, assuming the root ribs are equally zeroed on the bench. I seems to me that the jib is for dhideral as much as wash out. I would really like to see the jigs and instructions for this though.

My build table is just over 60" long, but when I'm doing 4*60 wings at 72" or other large wings, you can only work one half at a time. This is basicly what he is proposing I'm guessing. An 80" or 96" table would be nice, but you can get by with smaller.

Don