If I wantd to replace my Walbro carb in a G26ei Zenoah, where is that classification located on the carb? I notice a 3 digit number but did not notice any lettering (I might be overlooking something). Horizon was not much help as they simply send you a new carb. The tech. person I spoke to was not much help. I have located a couple places in the NW that carry Walbro, but I will need some numberical information so I can see about ordering. I also wanted to turn the carb 180 so I can have a handy reach to tune the hi and lo, but that misalignes the pulse port. However, they included a second insulator that is suppose to allow you to do that. I tried putting that on the carb but that orients the carb in such a way that moves the throttle arm off 90 degress. That would require me to do a bell crank operation. Has anyone more knowledge that I (which is close to zilch!).
Tim