Well, I'm Back! After exactley 1 year I'm ready to keep going on the 190. Very funny, I started looking at the plane, took it down, dusted it off and tried to remember where I left off. Wheel pants! I needed to complete one of the lower pant connections to the struts. Got it done.. Now while I was waiting for parts last year I took a break to take care of honey do's. I thought I remembered getting a box from DJ sometime during the break and put it somewhere. Today i started tinkering around and sizing up the G-62 to the firewall. During this time my head was going crazy trying to remember if I ever got the correct engine mount, fan and the stainless muffler. In a frinzy I started going through everything. No luck! Man, I really remember ordering or at least planning on ordering it. Where is it!
Today, I'm on the DJ aerotech website hunting down Joe's #. While I was dialing the phone, it all came back to me I turned to the right and under some graphics. There it was, and un opened box from DJ Dated Jan '08. It was a Red Rider moment!

Now I can get going on this beautiful bird.

Quick question for anyone building, Todd if your out there: I'm using the G-62 with the fan. Is the stock 62 prop hub what you used or do I need to have a longer one made?

BobH: Is the dry transfer sheet you show a picture of the one that ProMark sells? I was looking at there website and their sheet is slightly different than the one you posted.