I looked up the part in the manual so we can both be clear what we are talking about...lol...in the book it's called "Tail Rotor Belt Drive Gear" (http://www3.towerhobbies.com/cgi-bin...8027&search=Go) and here is a link to a picture of it at Towerhobbies. Yeah I figured you were talking about the tail rotor gear and I wish it was that one. This one is actually inside the frame and I'm pretty sure it's going to be some work to get to. I know for sure it's the tail rotor belt drive gear (that's a mouthful) because if you spin the bottom part of it the top part does not spin and it must be broken otherwise the tail rotor would spin. Also note that if I turn the top of the tail rotor belt drive gear then the tail does spin so everything else is in place and intact. I will replace the belt as well while I am in there since I'm in there already. I with they had a cnc rotor belt drive gear and I asked the company to make one in the future. Thanks for your help and I may take pictures of the repair process and post them for everyone else.

On another note, I absolutely love this heli and furthermore I thought that I wasnt going to going to like my new Triton 2 charger but I actually LOVE it. The heli is very nice to fly and is an excellent intermediate heli. The Triton2 charger is super nice and gives me beyond maximum flight times with just over 9 minutes ever flight and about 80 minute charge times using a 11.1V Lipo 2000mah. I'm going to order 2 of the 2200mah lipos soon and I was wondering if I could use a A123 battery instead since they charge so fast and last so long. I haven't really heard much other than good things about them. Thanks for your help! Josh.