Originally posted by chrisbarker
I have been building a CNC Router of my own design. I have gotten most of the ideas from alot of different places on the internet. It is almost done. I hope to be able to cut balsa and foam parts for my scratch built planes.
If I have to give credit to where I have recieved the most help I would say that The CNC Zone and the guys there are the best. There is a good mix of CNC professionals, machinists and hobbiests.
http://www.cnczone.com/
Another good place is John Kleinbauer's site.
http://www.crankorgan.com/
I want to cut out and build a couple of balsa planes and also foam/composite slopers.
Chris
Can you give us some pic Chris
