My first blunder built CG Eagle 2 covered it in transparent red. I cut my hinges after I had covered, well I didn't know you didn't have to go all the way threw wing with the hinge. I cut threw and installed hinges, chips and pieces that feel inside wing would bounce and vibrate around when fired up. Got lots of laughs from peanut gallery. Latest blunder, I try and put y harness in the wing for ailerons. I did this to my Tiger2,Giles 202,U-Can-Do, well seem to work great until I tried it on SSE and couldn't get the wing on. Well off with the shrink wrap and start over. Oh and heres a tip don't get kicker on your finger if you have CA on them gets really warm really fast. LOL