RCU Forums - View Single Post - Angel S EVO Build Thread
View Single Post
Old 04-18-2009 | 07:02 AM
  #386  
JanneL
Junior Member
 
Joined: Apr 2009
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
From: Helsinki, FINLAND
Default RE: Angel S EVO Build Thread

Hello,

I consider buying the Angel for F3A training and maybe for a little 3D, too. I would like to know about power setups with 5s LiPo. I would like to use 5s rather than 6s because I might buy new Hyperion G3 batteries, they can be charged at even 5C. And the charger's power is not unlimited, I think I'm going to get a Hyperion EOS720iNet 250W charger. So, 5s packs could be charged faster because of the lower voltage. But if there will be too little power with 5s, I'll go with 6s. So, what do you say? On Silvestri's flying videos this plane can also do a little 3D, so I would like to get a suitable prop to F3A and 3D, too. What about the batteries, there is 3300mAh and 4000mAh G3 LiPos available?


Janne