RCU Forums - View Single Post - Help with torque wire
Thread: Help with torque wire
View Single Post
Old 05-16-2009 | 07:39 PM
  #5  
Edwin
My Feedback: (2)
 
Joined: Feb 2002
Posts: 6,204
Likes: 0
Received 1 Like on 1 Post
From: Leander, TX
Default RE: Help with torque wire


I've cut a slot then scabed in a piece of balsa.  If weakening is a concern, scab in a piece on both sides of the cut.</p>

Edwin</p>
Edwin is offline  
Reply Like