RCU Forums - View Single Post - 40sf
Thread: 40sf
View Single Post
Old 03-27-2002 | 02:34 PM
  #3  
tbone4343
My Feedback: (4)
 
Joined: Mar 2002
Posts: 187
Likes: 0
Received 1 Like on 1 Post
From: arnold, PA
Default 40sf

i used an 40fp in a falcon and previosly used a 40 k&b on it both were bushing type apc moters the k&b was stronger. the sf is awesome with a ring and a pipe .sf is a little heavier but not much as it has bearings. most bushing motors are a lower end motor, but do the job but don't expect awesome power as i've never been inpresed with the fp