RCU Forums - View Single Post

05-25-2009 | 06:40 AM

#2

Mr Lee

Senior Member

Joined: Jun 2004

Posts: 161

Likes: 0

Received 0 Likes on 0 Posts

From: JHBJHB, SOUTH AFRICA

RE: offset for ae86

3mm in front and 6mm at rear if using HPI wheels but other manufacturers should be the same as well. This is on a TA05 IFSR chassis. will have the same effect with the cyclone.

pics
http://www.oneten.co.za/phpBB3/viewt...=6&t=10549

Reply Like