rangerfred</p>

I don't know yet how good it will fly with a small gasser because I havn't finished it yet, but I am scratch building my third Great Planes Super Sportster 90/120 and plan on using a Ryobi 28 on it, but I would think any of those little gassers would be a good match since the wing area ia around 910 sq in. RCM still has the plans I think. I have actually simplified the build though so the engine will hang out in the open like a stick, and I also moved the firewall back from the location showed on the plans. It should make a pretty good sport flyer and good candidate for a small gasser. The other two Super SPortster 90/120'sI built I used glow engines in, but this time I wanna try a weedie in one, and that may be something that interest you as well.
I also had the Giant Super Sporster ARF, but I had a G38 in it because I felt it would have been to under powered with a 31cc weedie engine. I think the SS 90/120 size builtfrom kit or scratchwould be a better candidate.The Ryobi 31in my photo is actually the one I put in my Sig Rascal 110. I have a Ryobi 28 thatwill be going into the SS90/120 when its done.</p>