I've been searching everywhere for this stupid little problem. I have finished a TF Cessna 182 with the whole landing, stobe, nav, beacon light setup from RAM. All of the lights are tied together to 6 AA batteries and a switch except for the landing lights. The landing lights are powered by the reciever. WhenI tested the lights together with everything on, when the stobes flash the landing lights dim and bounce back. I also hear the servos making a funky noise. Iuse only futaba everything PCM9CH. Everything is perfect except for that problem. Do Ineed to wrap the Strobe box control unit with some sort of shielding? Any help will be greatly appreciated.</p>