RCU Forums - View Single Post - World Models Midget Mustang
View Single Post
Old 06-18-2009 | 02:20 PM
  #8  
windsheer
Member
 
Joined: Aug 2002
Posts: 59
Likes: 0
Received 1 Like on 1 Post
From: Dallas, TX
Default RE: World Models Midget Mustang

<span lang="EN">

I have this plane with an OS 61FSR. It is aerobatic. It will snap, spin, flat spin upright, stall turn, cuban 8, and I am almost positive it will knife edge. I think mine is balanced just slightly behind the recommended point. Had problems with the landing wire covers moving in flight. They would turn side ways to the slip steam. They are off the plane now. Also had a wheel crack on landing. I was running out of runway so I started waging the tail to slow down. The wheel could not take the side load after many times of doing this.Itis one of my favorite planes. I have 15 that are ready to fly. This one comes out at least every second or third time out.</p></span>