RCU Forums - View Single Post - Gyro Test Pilot
View Single Post
Old 06-21-2009 | 05:13 PM
  #3  
CHRISTANEAGLE
Senior Member
 
Joined: Oct 2003
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
From: Lucama, NC
Default RE: Gyro Test Pilot

Thanks for your interest. The blades are 22 1/4 each. Weight is about 5 pounds. Engine is an LA .46 with a 10x6 Vess prop and the fuselage is 38" long. This gyro was hand built including the blades. The gyro flies very well slow or fast. I have done two or three loops with it ,but it's just too nerve racking. The aileroins and elevator are controlled by the head and I use rudder as well in the turns.