[quote]ORIGINAL: XPO
ORIGINAL: doubledee
I have observed that the use of a wireless connection causes a loss of punctuation.
I am the inventor and vendor of the Wireless Buddy Box by 2icrc - let me clarify and expend on the topic.
As far as my product, the trainer cable on the ground is eliminated by virtue of having two receivers onboard. These two RXs have two independent TXs on the ground, hence, no cable between them. So, in actuality I am not using any technology that would introduce what you are mentioning. Furthermore, there is no latency time on switching control to the secondary pilot and back. Futaba is coming out with a Wireless Buddy Box for their FASST Transmitters, it is a receiver that attaches to the trainer jack. The secondary TX communicates to the RX dangling on the back of the master TX, then finally out the antenna of the same. Futaba people saw my presentation at XFC 2009 in Muncie. They had their version of the Wireless Buddy Box at their table next to mine....their rep told me late 2009 due date at $100 dollars. (I should have taken a pic to attach to this post, I asked him for literature but he told me he didn't have it yet...) So in Futaba's case, the trainee inputs go through two stages
this would be a good question for you.
I have a JR x9303 2.4 and have it set up as a buddy system with a JR XF421ex 72 band. it works but I have to have my JR X9303 fifth channel in the Gear channel and it takes away all my mixing.
Can your system let me have my fifth channel in Aux 1 for the X9303 and use the gear on the RX for the XF421.
sticks