RCU Forums - View Single Post - Sebart Wind 110
View Single Post
Old 06-29-2009 | 03:09 PM
  #70  
tommy s
My Feedback: (55)
 
Joined: Jan 2004
Posts: 1,395
Likes: 0
Received 1 Like on 1 Post
From: Tomball, TX
Default RE: Sebart Wind 110

I'm not an electrical expert but I would use a 4025-16 if I was putting a Scorpion
motor in my airplane. I am currently assembling a Helios 90 pattern ship as a back up
for my Wind with a Scorpion 4025-16 motor, Castle HV85 ESC, and 3700mah 8s lipos.
It is the almost the same size as the Wind so I'll have a good comparison in about a week.
I use an APC 18x10e prop on the Wind so I'll try that first on the Helios and see how it works.

tommy s