RCU Forums - View Single Post - Overheat or Lean?
View Single Post
Old 07-08-2009 | 09:40 PM
  #45  
captinjohn
 
Joined: Jan 2002
Posts: 12,957
Received 4 Likes on 4 Posts
From: Hesperia Michigan, MI
Default RE: Overheat or Lean?


ORIGINAL: estradajae

Just another thougth.

Make sure also that your carb is fully seated and that the o-ring that seals the carb is in good condition.

The English manual calls for 0-15% nitro on all the engines...while italian version calls for 0-10% nitro.

As a general rule for all the engines...I wouldn't take it, I would try first and see what works best.

The more nitro in the fuel doesn't mean always more power, if the engine can't handle the nitro content so good. There are engines at their best at 5% nitro.

Saludos
What you said is so true...a lot of RC fans do not know that....and it is hard to convince them also!!! Capt,n