RCU Forums - View Single Post - glassing fuselage question
View Single Post
Old 07-14-2009 | 07:11 PM
  #5  
Edwin
My Feedback: (2)
 
Joined: Feb 2002
Posts: 6,204
Likes: 0
Received 1 Like on 1 Post
From: Leander, TX
Default RE: glassing fuselage question

Add another ditto. It gives a good painting surface. I dont do it for strength. And with practice can be done almost as light as an iron covering. I only put on one coat of reson then fill it with spackling/water mixed to a little thicker than milk rubbed in with fingers. Does a good job filling the weave.
Edwin