RCU Forums - View Single Post - simple 400 setup
Thread: simple 400 setup
View Single Post
Old 07-18-2009 | 12:49 PM
  #2  
Iceman67
 
Joined: Feb 2009
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
From: Burlington, KY
Default RE: simple 400 setup
Motor:
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=5221&Product_Name=HXT_28 35_(380S)_2700kv_Brushless_Inrunner
HXT28-35-2700

Battery:
http://www.hobbycity.com/hobbycity/s..._20C_Lipo_Pack
Turnigy 20C 3S 1800

ESC:
http://www.hobbycity.com/hobbycity/s...eed_Controller
Turnigy Plush 25 Amp

This setup, you could use a 5 x 5 up to a 6 x 5.5 APC "E" and have as much fun as a Simple 400 can handle. Make sure the wing is up to the 300 watts you can get from this system.

Have fun!!

Archie Adamisin
Muncie, Indiana
Iceman67 is offline  
Reply Like