RCU Forums - View Single Post - Pulling a Thrust Washer
View Single Post
Old 07-23-2009 | 03:59 AM
  #4  
DonStegall's Avatar
DonStegall
My Feedback: (1)
 
Joined: Aug 2005
Posts: 1,840
Likes: 0
Received 0 Likes on 0 Posts
From: MonroeNorth Carolina
Default RE: Pulling a Thrust Washer

Thanks Budman.

I had my wife operate the camera so I could introduce myself as a number of people have said I should do that.

It was just a quick video that I hope is useful to somebody. Most everybody in the US has access to a NAPA store, but our friends outside the US don't, and some in the US may find it convenient to get the pullers from me.

I will be doing a video on using bubbleless tanks soon. Now that I have [link=http://www.houseofpylon.com/JETT/JETT.aspx]JETT Engineering Products[/link] on my site, I will feature the JETT tanks and tanker, but I will show the Tettra tanks as well. I use the JETT tanks even in my sport planes like the Twist 3D with a four stroke engine for the consistent engine runs. The video will be for both racers and sport flyers.